mile9c1
New member
I removed my chaincase cover and forget where the two bolts with separate washers go (5 bolts have built-in washers, 2 do not). Any ideas? TIA!
seems like the two oddballs were the upper most holes, one being on the oil tank side. the rest besides the obvious one for the level check filled the lower holes. doesnt really make a difference as i think those two were different for an optional mount.
Throttle Junkie35
New member
The two without washers ago with the spring mount tabs.
mile9c1
New member
I don't have spring mount tabs. Is that an electric start thing? What do the springs do?
Throttle Junkie35
New member
Your right. I forget that spring hooks the chaincase or something. I have an 86 sitting here, I'll see whats what.
Last edited:
Throttle Junkie35
New member
Snowdad is one smart sob.. lol he is usually 100% correct and this time he is in fact 100% correct again. The flange bolts with no washers are the upper most cover bolts.
mile9c1
New member
Thanks guys! It's a 1991 Phazer II and the oil looked original! 