94 venture tfs 151" track

[Mschimmens]

Hi

I am looking to replace my track and have found a 151" x 15 x 2.52 x 1.25 track off a Arctic cat bear cat. I know the pitch is correct for the machine but my question is will the existing sprocket support the longer lugged track?

I have read that a 9 tooth sprocket will only support tracks lugs up to 1" and you need an 8 tooth sprocket for tracks of 1.25". I am not sure how many teeth are standard on my sprocket.

Any insight would be greatly appreciated as I think this new track would be a great addition to my machine.

Thanks.

 

[yamahamark]

As long as everything else is the same it will work and you can always trim the track if you need to.
Hope that helps...

 

[francis6667]

you are supposed to have 8t sprocket on your sled and i think it's supposed to be ok for 1 1/4 track lugs`,if not you can put 7t ,i did it for putting 2 inchs track lugs on the same sled.