ontarioyamaha
New member
I am in the process of re installing the skid. I took a ton of pics but I seem to be missing something. Is there a washer that goes inside of the tunnel between the front mounting hole and the arm? I took a look at the parts diagram and I see there is a washer that seems to be held in by a bushing. I am guessing that the bushing is plastic and it holds the washer in place. Is that correct? I have a couple of washer left over and they appear to go there but I was wondering how the heck you would hold them in place.
Can anyone shed some light on this for me?
Many thanks
Rodney
Can anyone shed some light on this for me?
Many thanks
Rodney
Yamahasrx700
Member
YES That stops the 'W" arm from cutting the flange on the plastic bushing.
super1c
Super Moderator
The washer goes on the inside of the bushing.
http://shop.portyamaha.com/fiche_se...Snowmobiles&make=Yamaha&year=2002&fveh=176276
#4, 3, 5 is what im assuming your talking about.
http://shop.portyamaha.com/fiche_se...Snowmobiles&make=Yamaha&year=2002&fveh=176276
#4, 3, 5 is what im assuming your talking about.
ontarioyamaha
New member
Got it all sorted out, many thanks, The washers were in place but had been painted over such that it was hard to see them. Got her back together this morning. Again, thanks and lets hope for snow!!!