Blew up our '03 viper

[YamahaGuy1]

A few years ago our 2003 SX Viper blew up. After researching it, we found that with stock jetting, the vipers run too lean in the mid range. This is what caused the failure. While just trail riding, out of nowhere the sled just seized. So after tearing it down, we need to find a rebuilt crank or something. Can anybody lead me in a direction where I could find one and not break the bank? Thanks in advance


Sent from my iPhone using Tapatalk

 

[Hammer Down]

Post a wanted add in the classified forum

 

[YamahaGuy1]

Post a wanted add in the classified forum

Ok, thanks


Sent from my iPhone using Tapatalk

 

[brethren]

Cvtech ABB (41 335-7220


Sent from my SGH-I337M using Tapatalk

 

[mrviper700]

see if you can find user: sxr1000, his name is lyle and he does cranks, does a good job have used him before.

http://www.totallyamaha.net/forums/showthread.php/96806-rebuilt-viper-crankshafts

 

[03viperguy]

Had mine done by Midwest crank last spring. Rebuilt the entire thing and it was $480 shipped

Sent from my XT1254 using Tapatalk