JeepJimmy
New member
01 SRX 700. all stock. replaced belt with new Yamaha superceded Part number. now I have a squeal/slipping sound off idle under load. Old one never made noise ever. just figured it was time for a new one. should I be looking at adjustments? since its not the same exact part number? thanks in advance.
Vincent
Well-known member
Behinde your secondary clutch you have three 8mm bolts with washers. Removing the washers opens the secondary enough to slack the belts a bit. It ends all those simptoms. Only thing to keep in mind is the bolts tips do wear after 15+ years so replacing them with fresh ones may help with adjustability.
Last edited:
YAMMIEGOD3:16
Active member
the superseed belt is 8dn-01. need to reset belt deflection. follow above instructions. 3:16xl