Sx Viper Bender 835 piston information needed.

F

FredrikMoström

New member
Joined
Feb 14, 2017
Messages
8
Location
Sweden
Hey all Bender 835 fans! I recently got a set of bender 835 cylinders and a head for it but no pistons. I live in Sweden so it is quite a long wait for som pistons from Bender and they are a bit pricey. I have read all there is about Bender 835 on the web and have seen some people say that some sort of ski-doo piston may fit? So my question is if there are someone in here who knows which piston may fit exept Benders? The bore of my cylinders is about 76mm. Hope someone can help me. Best regards Fredrik
 
I have a spare sitting on my bench for the 835 SRX, I can get you measurements and take a picture for you if that helps?
 
Sorry, I completely forgot! I put it in my phone calendar with an alarm to check tonight after work!
 
Diameter 2.966"
Height Skirt to edge of dome 2.521"
Wrist Pin Bore .787" (should be same as stock)
Top of wrist pin bore to edge of dome .825"
intake port to edge of dome .886"

Sorry for the imperial measurements, my caliper and micrometer didn't have the conversion built in.
 
You must log in or register to reply here.


Back
Top