UpNorthSRX
New member
I want to go from a 121 to a 136 on my 99 SRX. What is a good company to buy Rail Extentions from and a tunnel extension. Also, does anybody have any experiance with this conversion ? I need a little more info on what I should be running my gearing at, if I should change my 9 tooth driver to an 8 tooth. And how to go about setting up my clutch. It's a Roller Rooster Advant Edge secondary with a stock primary. and I'll only be riding trails and deep snow. No racing or mountain stuff. Any info will help! Thanks TY!
Last edited:
A couple of bucks
VIP Member
Sight sponsor Hartman has everything your looking for.
http://www.hartmaninc.com
And there is TY the classified section.
No need to go to 8T drivers for where you'll be riding. 8 toothers are for more than 1.5 inch tracks.
http://www.hartmaninc.com
And there is TY the classified section.
No need to go to 8T drivers for where you'll be riding. 8 toothers are for more than 1.5 inch tracks.
