ericsxviper
New member
Hey guys, new here. I have a 02 viper with triple Jaws pipes, jaws clutching, vforce3 reeds, port/polished, gutted air box etc... it has a 1.25 ripsaw on it now and it just spins. Over the summer I tried playing with the pro action a bit. Moved the FRA bolt all the way up, adjusted the transfer rods. Already had the limiter straps loosened. Itching to see if moving the full rate adjuster will make a difference but if not I'll have to look into studding it. Anyone ever run a 1.325" stud with 9 tooth drivers? Any help will be greatly appreciated. Thanks, -eric