1980deluxe
New member
Hey guys I'm new to the forum and just started restoring a 1980 enticer deluxe 340.
I read a post somewhere on this forum from 2011 about swapping a new vm-36 carb on to a 340, but there was not much detail on it for what changes had to be made, jetting etc. As it was mostly about the 250.
Does anyone has experience with swapping this new carb in?
Thanks!
I read a post somewhere on this forum from 2011 about swapping a new vm-36 carb on to a 340, but there was not much detail on it for what changes had to be made, jetting etc. As it was mostly about the 250.
Does anyone has experience with swapping this new carb in?
Thanks!
https://totallyamaha.net/showthread.php/98719-Ovation-340-Jetting-VM-34?highlight=ovation+carb
this could be what you are looking for.
this could be what you are looking for.
1980deluxe
New member
Thank you that helps. Trying to get any and all information I can as I have never dealt with carbs much.
I'm Building this sled from the ground up and I'm going to try to put as much trail performance as I can into it.