M-10 weight transfer

[vmax700sx]

I did resolve my darting problem thanks to the darting article in the tech section. (Thanks to Vmaxjohn and Mr sled for their input).
Now I would like to see if I can do anything about all the track spin I am getting. I seem to remember there was some talk about improving weight transfer on the M-10. Any suggestions?

 

[MrSled]

the block in the back you can cut off about 1/4" or call fast and get the white blocks, but in order for this to work really well you need to soften the skid.

 

[vmax700sx]

Mr Sled,

When you say soft are you referring to the FRA adjustment? I believe it is set on 2

As for the blocks do you mean the slider block? They have 2 different sizes?
Do you have a part number?
Thanks for your help.

 

[MrSled]

Yes set the FRA to the softest it will go for racing and yes the slider blocks, they have a white block that is shorter, they run them in the RX1 m10 and long skids and the black blocks on the 121" skids. Give them a call to order or trim the black blocks down some.