easiest way to tighting limiter straps?

[Johnnysrx]

What is the best way to tighting the straps. Take out the supension? because when I tried I could not get a wrench in there to turn the bolts.
Thanks

 

[kawirider00]

turn the sled on its side it wont roll itll sit on the knubs on the belly pan then u can slowly wrench them it takes a while cause its tight corridors

 

[03viperguy]

actually I got pissed enough so that I actually bought some of those slick craftsman box end ratchets. it fits sweet and you can ratchet it up fast I HIGHLY recomend them to ANYONE with limiter straps that need adjusting

 

[BETHEVIPER]

buy a 12mm gear wrench, cut it to three inches. this will swing clear around and miss the track.

 

[SRXSRULE]

Flex Head ratcheting wrench is the Best way. ===SRXSRULE===

 

[tsouth]

1/4 in drive ratchet works for me .not much room but you can do it

 

[Junior]

buy a 12mm gear wrench, cut it to three inches. this will swing clear around and miss the track.

bingo, I have a gear wrench cut off to about that length specifically for that job