What’s everyone using for front shocks
- Thread starter Ttmech
- Start date
low slung
Active member
My brother had a 2006 Nytro with fox floats.The only good things about them were Lightweight and Bottoming resistance,many negatives after that(but they were high quality).
There is more to it than just bolting on whatever shocks you like.
Most shocks are not the correct width at the attachment point.
If I was to do it, I would put Viper shocks on the SRX, but you will need custom brackets made to do that as well.
Do a search on "long travel SRX"
Im sure you will find plenty of info there.
Most shocks are not the correct width at the attachment point.
If I was to do it, I would put Viper shocks on the SRX, but you will need custom brackets made to do that as well.
Do a search on "long travel SRX"
Im sure you will find plenty of info there.