sifton
Member
I have a 2000 Max that I stretched to a 151. Now it is time for a swap of the skid. Which skid is the better? I want to keep the 151 track.
Thanks guys....
Thanks guys....
151 max skid swap
- Thread starter sifton
- Start date
What makes you want to swap skids? Just wondering what is left to be desired as I'm getting into the pro action now.
Vincent
New member
Probably to save weight, as proaction are heavy.
sifton
Member
Yes, weight. Also an upgrade to a little newer technology..
My buddy was talking about the newer arctic cat skids are the most saught after in the hill climbs. Not to hijack the thread but what is the best mod you have tried for weight transfer? I am going to try fabricating my own MPI kit tmrw!
sifton
Member
All I have done was the transfer mod. Made my own.
sifton
Member
That was a minor cost. I went to a farm supply store and got some belting, not sure what it was meant for, but worked very well. Made my straps and all good. No ratcheting for me as I run extroverts.
sifton
Member
Never took any wheels off. No spacers. I cut my straps and wrapped around the shafts and then bolted together..
sifton
Member
After thinking, I had cut the transfer rod and used that as the bushing to fill the gap.
Here is a previous thread on kits:
https://totallyamaha.net/showthread...nsfer-kits?highlight=transfer+enhancement+kit
Here is a previous thread on kits:
https://totallyamaha.net/showthread...nsfer-kits?highlight=transfer+enhancement+kit
sifton
Member
I can't remember, that was along time ago...and I am old!!! Probably took them off as I went thru whole sled on a rebuild. Wheels should come off fine. I don't recall having any issue when I did mine....