25 tooth hyvo for SRX??

[tomseal6]

Will a 25 tooth hyvo gear fit in a SRX chaincase? Is it available?

Wanting to swap to a 1.00 track with 1.25 inch studs and want to run 8 tooth drivers.

25/37 gears brings the gear ratio back to stock at 1.67 ratio

Stock gears 23/38 with 9 tooth drivers is 1.66 ratio

 

[Mysledblows]

I did a 24 or a 25 in my apex which is the same basic case. I bought both but don't recall which one I ended up using.

 

[tomseal6]

A 25 for SRX has smaller diameter splines/jackshaft.

If anybody wants to trade please contact me.

 

[tomseal6]

I did a 24 or a 25 in my apex which is the same basic case. I bought both but don't recall which one I ended up using.

I went to a 26 in my apex, has the larger shaft.

I went with 07 Attack clutching which has much lighter fly weights and is a lot more responsive. I just didnt have any pull on top end with the stock gears so I went to a larger top gear. I have a 25 for Apex to trade.

 

[norwegian]

Why are you going to run 8 tooth drivers?

 

[tomseal6]

1.25 studs

 

[A couple of bucks]

Why are you going to run 8 tooth drivers?

Peace-of-mind when using teeth that are 1.25 .

 

[norwegian]

I see. Pretty tall studs then.

 

[Vmax4creed]

That gear is still available at Wahl not sure about Oem availability, got some lower gears this spring for my srx. I also put 8 tooth extros on the drives lots of room.