Race Jetting

vanslay

New member
Joined
Dec 11, 2018
Messages
61
Location
Rome ny
Hi guys,

Anyone have any suggestions on jetting down a little bit for snow drags? Right now I am running 150's on all three with power inc pipes and it runs great, although there is noticeable improvement in power when it gets to 0 degrees or below. Doesn't burn lean when it's that cold, I'm sure its the best jetting for trails. I have a 500 ft race this weekend and temps are suppose to be in the 30's. Anyone have a rough suggestion of where to start for maximum performance in that temp range? I was going to try running a set of 145s or 147.5. Thanks in advance!

-Jeff
 
Just for reference, I run a 147.5 with my bender pipes, and same with my SLP pipes for trail riding.
 
Thanks for the responses, i saw on turks tuning page he said to run 145s for the power incs. I got some 146.3 and 147.5 to try before the races!
 
Ran great, went to 146.3. Went to the races this weekend and won a couple, was pretty close to this f7 in the video that got first place. I was shocked how well I kept up. Back to the drawing board I know there is more left in the old girl with some more tuning and tweaking. Thanks again to everyone on the forum for the help!

https://www.youtube.com/watch?v=3DojTZag6jw&feature=youtu.be
 
Last edited:


Back
Top