bravo LT track

[Newfoundlandermike]

Looking for suggestions on a new track for my 91 bravo LT. I have been looking at the camso engery 9794, I would like something good on and off trail

 

[Maim]

as that in a 2.52 pitch track x 136" x 15", i would go with a 1" to 1.25" lug track as they are the cheapest to buy new. i put a 1.25" ripsaw on a 97 et410 t/r and it actually picked up speed compared to the stock track. has good trail manners and was a vast improvement in the powder. you can also go single ply if you want to save some weight but i only run 2 ply.

 

[Newfoundlandermike]

thanks I was also looking at the Camso Hacksaw with the 1in lug, can't go any bigger than that for a lug be very tight

 

[Maim]

I put a ripsaw on a 1990 ET400T/R and brother that one was tight. only has 1/8-1/4" clearance but is working awsome. makes the stock track look like an ashphalt track when running side by side in the powder with its twin.

 

[MrSled]

thanks I was also looking at the Camso Hacksaw with the 1in lug, can't go any bigger than that for a lug be very tight

Thats a great overall track. You wont be disappointed for trail riding.

 

[Newfoundlandermike]

Thats a great overall track. You wont be disappointed for trail riding.

How does the track handle loose snow?

 

[MrSled]

How does the track handle loose snow?

Not as good as a 1.25 rip saw but for a bravo it does really well.

 

[Newfoundlandermike]

Not as good as a 1.25 rip saw but for a bravo it does really well.

thanks fingers crossed it works as good or better than the orginal off trail

 

[MrSled]

thanks fingers crossed it works as good or better than the orginal off trail

Off trail tracks should be taller but as you stated there is no room and for what it is and the space you have, there is no much choice over the stock track.