02 srx 700 jetting

Yamitriple · Oct 22, 2020

What's the best jetting for an 02 srx, is it safe to drop 1 size on the mains? Or drop the needles some? Or is stock pretty much where it needs to be

blevis213 · Oct 23, 2020

I would leave it with the dcs. Or even fat it up with 01 mains and leave the 42.5 pilots. I think the 01 mains were the safest

Yamitriple · Oct 24, 2020

So there isnt much wiggle room on the 02

Maim · Oct 26, 2020

as i recall most 02 srx owners ended up jetting to 01 spec to keep the dcs light off.

Yamitriple · Oct 26, 2020

Maim said:
as i recall most 02 srx owners ended up jetting to 01 spec to keep the dcs light off.

Alright then I'll prolly just do that. Is it 150 mains across the board on 01s?

Maim · Oct 26, 2020

i want to say yes but the tec page link will have the info you need.

blevis213 · Oct 26, 2020

150 pto 148.8 center and mag

Yamitriple · Oct 27, 2020

blevis213 said:
150 pto 148.8 center and mag

Alright thanks alot I'll give them a shot first. Not worried about losing much performance, would rather just have it reliable and keep the dcs off

blevis213 · Oct 27, 2020

I also turned the fuel screws out to 1 1/2 to 1 3/4 to keep the idle hang down