Yamaha phazer pz480 chaincase removal

[Srx007]

Hi all, I'm having trouble removing the chaincase housing, cover is off, sprockets off all bolts removed but it doesnt want to slide off the Jack shaft or drive shaft, I didnt see any set screws and am kinda stumped. Keep in mind the sled spent a little time under water and the owner didnt want to finish going through it when we brought it back up. This was 2 seasons ago, maybe the bearings are rusted to shafts?

 

[MrSled]

Hi all, I'm having trouble removing the chaincase housing, cover is off, sprockets off all bolts removed but it doesnt want to slide off the Jack shaft or drive shaft, I didnt see any set screws and am kinda stumped. Keep in mind the sled spent a little time under water and the owner didnt want to finish going through it when we brought it back up. This was 2 seasons ago, maybe the bearings are rusted to shafts?

Can you post some pics of what you have so far. It should come right off.

 

[Srx007]

Thx for the response and I thought the case should slide off like it did for my SRX but I had to ask if I missed something. There is alot of crud built up on the shafts as well, I should have mentioned that. Its been sitting a while and the oil was chunky. I will post pics tomorrow.