98 SRX 700 - Base Gasket Replacement

[IFsledder]

I'm going to be replacing the base gasket in my 1998 SRX 700. I've never done this before. After I remove the old gasket and get the crankcase and cylinder surfaces cleaned up good, do I simply install the new base gasket dry or should I use some type of sealant to smear on the gasket?

Thanks for any insight and advice.

 

[Simonsweden]

Installera new gasket dry

 

[sideshowBob]

The OEM base gaskets are metal and as stated meant to be installed dry.
Don't install an after market fiber gasket...stick with OEM.