This is the BIGGEST, BADDEST AND STRONGEST Outlaw drag stud on the market!!

MrSled

Site Admin/CEO
Staff member
Joined
Apr 25, 2003
Messages
9,331
Age
51
Location
Weston WI
Website
www.totallyamaha.com
From SnowStuds:

"We are extremely excited and proud of our latest product offering!! This is the BIGGEST, BADDEST AND STRONGEST Outlaw drag stud on the market. This stud is made out of a super strong alloy, it is a full 2” in height, it has a sharp penetrating shovel point and a true 5/8” wide flat for ultimate hook up!!
These will be sold as a package with a lightweight threaded 1.20” head stud blank and your choice of backer.

Stay Tuned For Pricing!!!
We are taking pre-orders for these studs starting on 7/22/2021!!
As always if you have any questions please reach out to us 888-234-9822!! "studs 3.jpgstuds 2.jpg
 

Attachments

  • Studs 5.jpg
    Studs 5.jpg
    58.4 KB · Views: 0
  • Studs 4.jpg
    Studs 4.jpg
    58.7 KB · Views: 0
  • studs4.jpg
    studs4.jpg
    62.8 KB · Views: 0
  • studs 1.jpg
    studs 1.jpg
    62.7 KB · Views: 0

norwegian

Active member
Joined
Nov 5, 2004
Messages
2,777
Age
41
Location
norway
Will this work on a 2 stroke Yamaha at all? From what I can see, you would have to drop your suspension to the lower mounting holes on the frames, get bigger/taller stud protectors in the tunnel and run one tooth less at least on the drivers, if this is ever going to have a chance to pass the front heat exchanger without ripping it apart.
 

MrSled

Site Admin/CEO
Staff member
Joined
Apr 25, 2003
Messages
9,331
Age
51
Location
Weston WI
Website
www.totallyamaha.com
Will this work on a 2 stroke Yamaha at all? From what I can see, you would have to drop your suspension to the lower mounting holes on the frames, get bigger/taller stud protectors in the tunnel and run one tooth less at least on the drivers, if this is ever going to have a chance to pass the front heat exchanger without ripping it apart.

Smaller drivers and regearing back up. You can add front protectors too.
 


Top