pavilion
New member
- Joined
- Dec 7, 2023
- Messages
- 1
Hello all. I know this is a sled forum. However I'm sure my fellow yammie ppl dabble in all !
I recently grabbed a rhino . Long story short, I dunno much about them.
After some playing, it's got a top end of about 60km/h , then sounds like a limiter kicks in.
Also is prone to backfiring when letting off the throttle.
Otherwise is in great shape and seems to run quite well !
Ideas, thoughts , comments ?
Thanks in advance !
I recently grabbed a rhino . Long story short, I dunno much about them.
After some playing, it's got a top end of about 60km/h , then sounds like a limiter kicks in.
Also is prone to backfiring when letting off the throttle.
Otherwise is in great shape and seems to run quite well !
Ideas, thoughts , comments ?
Thanks in advance !
welcome!
the atv section is over on ty4stroke.com
sounds like you need the overdrive sheive for secondary. brother did it to his rhino 700 and can hit 80kph on a good long flat straight stretch before it hits the limiter with 26" x 14" rims/rubber on it. with 26" x 12" he hits 75 and this is with stock limiter. with stock secondary he was only hitting 60 kph as well. his pops as well ocassionally on hard decel on a good run. check that all the wheel bearings are good as that will hurt top speed as well.
the atv section is over on ty4stroke.com
sounds like you need the overdrive sheive for secondary. brother did it to his rhino 700 and can hit 80kph on a good long flat straight stretch before it hits the limiter with 26" x 14" rims/rubber on it. with 26" x 12" he hits 75 and this is with stock limiter. with stock secondary he was only hitting 60 kph as well. his pops as well ocassionally on hard decel on a good run. check that all the wheel bearings are good as that will hurt top speed as well.
Check the exhaust for leaks as that can cause popping on decel.