Starter Solenoid/ Relay Cable Location

[srt842]

Hi,
I'm installing electric starters on a 2003 Viper and a 2004 Venom. I have the Venom complete, except I cannot find the 4-pin cable that plugs into the starter solenoid/ Relay. Any help would be appreciated. I found a straight line 4-pin connector, but it would need a pigtail to plug into the solenoid, if that's the correct cable. I was hoping to find a white connector, to plug directly into the solenoid, but I have been unable to find it.


Thanks!

 

[MrSled]

Are both harnesses set up for electric start? Have you looked on a Yamaha Parts finder to see if it needs a small harness?

 

[srt842]

That's what I'm trying to figure out. Some things I've read online imply the white 4-prong connector is wrapped up in a wire bundle. I was hoping to hear from someone that has actually done it to confirm if the connector is there and where it's located. What part finder can you recommend?

 

[Maim]

i use the parts fiche on port yamaha a lot.

i know on my brother @kirkswims 02 viper, the plug was there in the harness when he added the e start to it.

 

[srt842]

i use the parts fiche on port yamaha a lot.

i know on my brother @kirkswims 02 viper, the plug was there in the harness when he added the e start to it.

Thanks for the feedback, do you have a link to port yamaha?

 

[MrSled]

https://portyamaha.com/Shopping/Yamaha-Fiche

 

[super1c]

I’m not familiar with the venom set up but there is a pigtail needed for most pro action e starts that goes from solenoid to the e start pigtail off harness. It was a hard find back in the day and I’m sure harder now. https://totallyamaha.com/snowmobiles/aaTECH/electric_start/electric_start_install.htm

Pigtail is 27 but can’t remember exact pin placement. I just made my own.