Viper 136 W/1.5 Track

nodoo_s

nodoo_s

New member
Joined
May 2, 2003
Messages
364
Age
58
Location
wales maine
I am looking at putting 136 on my viper but cant decide on camo 9800 1.5" or just to go with 9819 1.25. I currently have camo 9818 1.25 and it goes better than my wifes ripsaw in the powder. I like to play in the boonies and the lugs on the 9818 are very durable. I live in maine so lots of deep powder is hard to find so we have to run ditches and old cuttings. just wondering how the 9800 would work on the trail and would it fit ok if i went that route. anyone who has 136 on viper please give me some feedback.
 
Just so you know , i ran the polaris 1 3/4 x 136 track in my viper this year , and i loved it , i will NEVER run anything less then a 1 1/2 again , trail sled or not ...the 1 3/4 fits with 9 tooth drivers , just have to remove tunnel and front heat exchanger guards , i ran the anti slip drivers , and about a 2 " sag in my track ...LOVE IT !!!!!!and worked well on the trails also (as long as your not behind me ;)! ) just a little more info .....take care
 
I was leaning towards the 1.5, it looks like that will be the route i go, not that it matters to much but about much topend did you loose?
 
nodoo s

I live in maine also. Put a 1.5 Camo on my Viper this year and I love it. I won't go back to anything smaller.
 
i have a 121 1.5 inch and love it, awesome track for the holeshots, and REALLY grips on the trails.
 
You must log in or register to reply here.


Back
Top