What size studs and carbides?

[srxz]

Just put a 1 inch camo 9830 on my 01 srx, pre holes with 144 in the middle. What size of woody's studs would be safe and reliable and the would 8 inch carbides be enough. Also there are no protectors on rear heat exchanger, do I need these? Great track though I highly recomend it.

 

[MrSled]

1 1/4 or 1 3/8 studs, 8" is the best and 6" would be the least and yes, exchanger protection is a must.

 

[srxz]

Thanks Mr. Sled, I will be ordering the parts tomorrow. We are finally getting some snow here in the snow belt of Ontario.

 

[MrSled]

Your welcome ...we need some snow, can you send some our way....

 

[Turbo50Mike]

What is the heat exchanger protector actually doing? Is it protecting the exchanger from the studs themselves, or things that the studs would "throw" into the exchanger?

Anyone have a pic of the protector? And do I need one for my 2001 SXr700? I see the heat exchanger in front, but then there are only some long ones under the steps(?). I don't see one in the rear.

MJB

 

[DHSRX]

Your SXR does not have rear heat exchangers.
Heat exchanger protectors are installed to stop the studs from damaging the heat exchanger.