G golmax New member Joined Nov 21, 2004 Messages 61 Aug 7, 2005 #1 Hey guys and gals its been awhile. Im gonna be putting a 2003 rx1 skid in my 2000 srx and im wondering if the hole pattern is different or is it going to bold right in? any suggestions or instructions would be helpfull. Thanks, Golmax
Hey guys and gals its been awhile. Im gonna be putting a 2003 rx1 skid in my 2000 srx and im wondering if the hole pattern is different or is it going to bold right in? any suggestions or instructions would be helpfull. Thanks, Golmax
sxrsist VIP Member Joined Jun 25, 2003 Messages 344 Age 54 Location sask. canada Aug 7, 2005 #2 im pretty sure it will bolt right in, you need to remove the rearount off the rx1 skid and install your spacers, should work fine
im pretty sure it will bolt right in, you need to remove the rearount off the rx1 skid and install your spacers, should work fine
C clharris New member Joined Jan 20, 2005 Messages 34 Location mantorville MN. Aug 7, 2005 #3 I took my skid out of my Rx-1 Put it in one of my vipers & put the viper skid in my 98 sx-600 & they all interchanged if that is any help?
I took my skid out of my Rx-1 Put it in one of my vipers & put the viper skid in my 98 sx-600 & they all interchanged if that is any help?
MrSled Site Admin/CEO Staff member Joined Apr 25, 2003 Messages 9,938 Age 55 Location Weston WI Website www.totallyamaha.com Aug 7, 2005 #4 The RX1 skid has a shorter top cross shaft...you will need that or the drop brackets.
G golmax New member Joined Nov 21, 2004 Messages 61 Aug 7, 2005 #5 Thanks alot everyone. That puts my mind at ease for sure.