Questions on Exciter II

tomx

New member
Joined
Sep 15, 2005
Messages
15
Just pick up a barn fresh '92 Exciter II. I cleaned the carbs put in fresh gas and it fired right up. It ran ok for about a minute (up to 7k rpm) and then started to bog as I gave more gas and backfired a couple of times then it died. I pulled the plugs and they were black and wet. Does this mean i'm just too rich or is there something else I should look into? Also anybody know the size of the Mikuni? The sled didn't come with a manual. I'd be greatful for any help. Thanks.
 
I would just go through the entire sled and clean everything. There could be ANYTHING anywhere in that sled. Is there garbage at the bottom of the tank you may be getting through a crappy filter. Are the carbs filthy, bad wires, bad coil. I had to replace a coil and wires once and the sled ran fine afterwards. It could be a number of things. Like I said, I would just go through the sled one piece at a time. That's part of the fun anyways, I think.
 
I once had a similar problem with my exciter, it was the throttle cable that become twisted in the flipper so the tors kicked in, man did i have trouble finding where the problem was. #$%&*
 


Back
Top