plug wires?

hoffam19

hoffam19

New member
Joined
Oct 24, 2004
Messages
268
Age
40
Location
The UP
Do the plug wires screw out of the coil like they do out of the sparkplug caps? they look like they have some type of glue in them or somthing on the coil side.
 
they are glued in. I have replaced them on a exciter before, had to dig the wire and glue out of the coil and glued a new wire in
 
Yeah i have the same problem, I bought some NGK wires for my '90 phazer but couldn't get the old wires out, Still haven't got them out yet. any advise on how to do it?
 
Last edited:
sxviper32 said:
is there a stud sticking up in there? any help!!! thanks!!!
Click to expand...

I dont want to try and rip em out if there is no stud to push new ones back in on to
 
Foul family pictures

Come on Hoff. Family pics like that should be prohibited!!!
Hoff is that you?
 
I replaced my wires on my 1993 Exciter SX. It had the sealed coils as well. I ran NGK wires. What I did was clipped the wires about 3 inches from the coil. There is an adapter that Denis Kurk sells that you will need. It's about 5 or 6 bucks and you just twist one end on to the coil side and the other to the NGK wires. This sounds flimsy, but it worked and worked well for my sled.

Denis kurk part# 20-0355 you will need one per coil
 
You must log in or register to reply here.


Back
Top