SX700R clutching

[slim]

2001 with end dumps 51/43 helix.I see in tech pages i should be running a 47/41 helix with 89L weights,14.5 rollers. I know where to get the helix from but are the weights and rollers dealer items and would heel clickers work better. I have added lead to my stock clutch, works alright but always trying to get a little more low buck performance.

 

[Turk]

The rollers & weights are Yammie items. Run a 51/43 with a 2.4 gram rivet & helix wrapped at 60-70 degrees. You gotta have those rollers for sure.

 

[slim]

Are my rollers 8mil or 9mil and is the 2.4 gram rivet for the 89L weights.Thanks in advance.

 

[Turk]

Rollers are 9mm. You need part # 8cr-17624-00-00. The rivet is for the 89L weight. For lighter rider you might need a 3.1 or 3.6 gram rivet.Get a w-s-w primary spring too.