What 2 cycle Oil to Use?

that's about the same prices i was seeing- thanks though. they claim you gain 400 to 600 rpm's w/ blue marble?? or something like that? c'mon now- you'd have to re-clutch! LOL-- i think i may try it though, all the articles i read on it were nothing but positive
 
I have been running it in my sleds, dirt bike, and snowblower for 4 years now with nothing but great results. My local shop sells the gallon jugs for $29.99. I wont run anything else. But you dont have to take my word for it, just read the articles in the various sled mags listed on http://www.bluemarbleoil.com/Products/productNews.htm

If glowing reviews after extensive testing from 4 different sled mags is not enough to convince you then I dont know what to tell you.
 
I ran the blue marble first year i had my viper, and well if you think your going to get 15 horsepower from changing your oil your crazy! thats what it would take to raise your rpms 300-400 rpm most sleds. didn't see any increase in rpm....... imagine that! protection of the motor well lets say i had to replace the rings after the first season, i was running pretty lean, but i didn't burn it down! ring wear around the exhaust port was high, but no scuffing. powervalves did stay very clean. I think yamalube protects better. maximum protection seems to be with amsoil, or klotz. Probably going to try klotz this year. almost forgot to mention that with the marble, reading your piston wash is a pain-in-the-a$$. very hard to see it.
 
Last edited:
You must log in or register to reply here.


Back
Top