SRX Exchanger on a Viper

[NLViper82]

I just went to put a srx exchanger on my viper and i seen the bleed hole is different. Do you just drill a new hole for the bleed screw or do you drill and tap another. Or does it make a differnence. Thanks.

 

[Ding]

Drill a new access hole in the tunnel. This was the case with the ones offered by Yamaha as they are actually the same part.

If you need the measurements I can find it for you, or you can just mark it yourself.

 

[redsnake3]

i just drilled a new hole for the existing drain bolt.

 

[NLViper82]

Thanks, but I will just mark it myself.