1" lug to a 1.5" on 97VMAX

[sledlife]

I have just ordered a new 121X15 X 1.5" RIPSAW to replace my existing 121X1" Challenger Track. on My 97 VMAX XTC 600.

Do I need to get smaller Drive/Track Sprockets for the track to fit?
Will I have the clearence with the new lug Height without doing any mods?

 

[yamaholic22]

to run this with 9 tooth drivers you will have to remove the tunnel and heat exchanger protectors if you have them. If you want to stud it you will have to go to 8 tooth drivers.