trigger03
New member
- Joined
- Nov 2, 2005
- Messages
- 8
Does anyone have any links they know of where I can get detailed information on intsalleing my reverse kit on my 2001 sxr600 triple?
thanks
thanks
greg
New member
I have the Yamaha instructions that come with the reverse kit. If you want, I can take pictures of it and send to you. (about 5 pages).
let me know,
Greg
let me know,
Greg
CdnSxR6
New member
the instructions are in the tech pages of the site
trigger03
New member
- Joined
- Nov 2, 2005
- Messages
- 8
greg said:I have the Yamaha instructions that come with the reverse kit. If you want, I can take pictures of it and send to you. (about 5 pages).
let me know,
Greg
Greg, that would be GREAT. please do.
Email is schrist3@rochester.rr.com
trigger03
New member
- Joined
- Nov 2, 2005
- Messages
- 8
CdnSxR6 said:the instructions are in the tech pages of the site
HELP!!!
I'm in the middle of the install and the kit came with a 20 tooth drive gear. The one that came off my sxr600 is 19. The instructions say to use this 20 toothe gear if you have a PZ 500.
Should I put this gear in to get some extra top end out of my sled???
( a new chain came too)
It all fits.., but the instructions say nothing about using it.
OZ
yes but...
I believe your stock gearing is 20/39, ...that means your stock ratio is 1.95, ...if you want to maintain your stock ratio, consider your driver size (stock 9tooth), lower gear size on your new reverse kit (?) and your upper gear size (20),...you want to watch your chain length as well. Refer to the gearing chart.
http://www.maxxperf.com/gearingchart.htm
http://www.maxxperf.com/gearingchart.htm