benderxtc700
New member
Just had a few questions, everyhing you guys make seems to be top notch and 
on the bling . Have you ever tried making your own skid or replacement parts for the pro action i.e. w arm, transfer rods,etc? Would the alum parts hold up?
And a question about your skis, What kind of profile is on the bottom, is it a replica of stock, more like an aftermarket design or your own?
Im only asking ...or is it dreaming because a new sled is probably out of the question for a while but upgrading is what my sled is gonna be about make it light, reliable, and fast!
Thanks
Todd
on the bling . Have you ever tried making your own skid or replacement parts for the pro action i.e. w arm, transfer rods,etc? Would the alum parts hold up?And a question about your skis, What kind of profile is on the bottom, is it a replica of stock, more like an aftermarket design or your own?
Im only asking ...or is it dreaming because a new sled is probably out of the question for a while but upgrading is what my sled is gonna be about make it light, reliable, and fast!
Thanks
Todd
2ooosrx
VIP Member
- Joined
- Oct 2, 2004
- Messages
- 2,414
- Age
- 34
- Location
- Gurnee, Illinois
- Website
- www.cbperformanceparts.com
We are making a complete skid for the srx right now out of alum, we were testing the parts last year. The weight saving is about 30 pounds. The ski is our own design it is a little flater than stock, it is 4.8 pounds lighter then stock. We just finished making skids for the 120 snow cross out of alum for goodwin performance.
Bruce
Bruce
Last edited: