PI pipe jetting?????

[terret725]

im getting some center dumps theyll be here this week and on teh tech page it says to jet it 145 145 143.8 and the fule screw out 2 turns for a compleatly stock motor i have reed spacers on will this change what teh jetting has to be at all? it says to put (optional) 47.5 pilot , can i get away with just using stock? or is it recomended to use that jet?

for the fule screw i just turn it in all the way and then back it out 2 turns right?

 

[change_up]

Yes. For the fuel screw you turn it in all the way and back it out 2 turns. I would THINK you could get away with using the stock pilot jet as my AAEN triple's work fine with the fuel screws at 2.5 turns out with my 600. Reed spacer's shouldn't affect any jetting.

 

[terret725]

thanks