name that bolt!

n2oiroc

n2oiroc

New member
Joined
Sep 5, 2004
Messages
1,341
Age
45
Location
milwaukee, wi
what is this bolt for? i had the bright idea of taking 2 sleds apart in the spring and waiting until now to put them back together! #$%&* ;):D :o|
 

Attachments

  • bolt1.jpg
    bolt1.jpg
    85 KB · Views: 11
  • bolt2.jpg
    bolt2.jpg
    99 KB · Views: 11
  • bolt3.jpg
    bolt3.jpg
    81.2 KB · Views: 13
Its for your track drive shaft.... maybe to hold on a reluctor wheel for your speedometer????? Some have a cable (srx) and some have a trigger wheel for a pickup to measure track speed!!! Do I win a prize??????? Gary Oles nosboy
 
that might be it. thats about the only think i havent put back on yet. i wonder why it has a hole through it. oh well, thanks!
 
richierich said:
it is the drive shaft bolt that holds the speedo pickup sensor on.normally i would say leave it off just added weight but you might want to know how fast you are going :)
Click to expand...
or when i sell it in a few years i can be commended on how low the mileage is on it! lol! ;):D
 
I need to fix my speedo gear on my viper. Man you can go fast when you switch to 8 tooth drivers. I just can't remember to take 1 or 2 teeth off. Maxdlx
 
maxdlx said:
I need to fix my speedo gear on my viper. Man you can go fast when you switch to 8 tooth drivers. I just can't remember to take 1 or 2 teeth off. Maxdlx
Click to expand...
1 tooth for 9's, 2 teeth for 8's. i have 8's with 2 teeth removed and it seems real close to accurate.
 
maxdlx said:
Did you just use a hand grinder or what. thanks Paul
Click to expand...
a dremel with a fiber cut off wheel. then i finished it with a 1/4" sanding drum. 2 teeth opposite sides.
 
it is the speedo bolt, i don't know what the hole is for, but it is for sure the speedo bolt
 
I have a theroy on it. It calls for locktite on the threads, and it goes in the drive shaft end, where there is no way for air to escape. If you didn't have a hole in the bolt it would act like hyralics, and cause problems. What ya think Maxdlx
 
some application require the speedo cable to go through the bolt!!!! Now you know!!!!Gary Oles nosboy
 
You must log in or register to reply here.


Back
Top