Studding advice on a 340 Enticer

[1Gunner]

A buddy's 13yr old son has an enticer 340 that we want to stud for general safety and trail use. What would you guys recomend? The track is stock.

Thanks!!

 

[yamahacrazy]

I HAVE A 300 ENTICER. I HAVE ASKED THE SAME ? AND EVERY ONE TOLD ME THAT I DON'T HAVE THE POWER. BUT I WOULD USE STUD BOY. I THINK 72 OR 96 STUDS WILL DO IT. I AM PUTTING 48 IN MINE.ONLY BECAUSE I CAN'T $$$ IT.IF YOU NEED A PLACE TO GET THEM I GO TO www.denniskirk.com

 

[1Gunner]

I was thinking 48 as well. We only want them in for safety.

what size?

 

[yamahacrazy]

What Size Are The Lugs.mine Are 1/4" Or 1/2". I Think I Would Ues .875" On The 1/4" Lugs Or 1.00" On The 1/2" Lugs.

 

[yamahacrazy]

DO YOU NEED THE PTTERN FOR THAT? if you order a catolg from dennis kirk that show you on pg199.

 

[SledBoy]

How fast does a 340 enticer go?

 

[yamahacrazy]

My Enticer 300 dose 70mph

 

[change_up]

Really? My 340 used to only go 70 mph on the dreameter.

 

[yamahacrazy]

Yeah my sled didn't do 70 cuz of the belt.I was going to get one but the motor took a crap. Now i know it will do 70mph cuz all the ones on my block do and mine will be bored and i will do some mods to the gearing and clutch.I will still have a 300 but it will be a little more than that.

 

[Waterfoul]

I'd just do an easy pattern. Perhaps one stud center of window, then 2 studs evenly spaced on next window, 1 stud center, 2 spaced, etc...

It will help with braking that's for sure.

 

[yamaholic22]

i agree, 72 studs (1,2,1,2,1,2 pattern), however, don't put them directly in the center of the track, they don't do as much there, stagger them but the closer they are to the slide rails the more effective they are because that is where the weight is applied, and the center of the track does bow in from pressure so the studs in the center aren't as effective.