what to do for clutching

R

Roushrider81

New member
Joined
Dec 4, 2005
Messages
29
alright i am getting AAEN pipes for my 2000 v-max 700 and i have no idea on what else to do... i know you need to do clutching and jetting... but i don't know what to order... so if somebody can tell me what parts i need to do for clutching or if people have the same sled as mine n what they have and how they like it...

hear's AAEN site if you want to look there www.aaenperformance.com

but i just want a really torque and quick sled the picks up real good from the low end. any suggestions?????
 
You won,t get good low end with those pipes but they do scream on top end. If you posted your elevation & temps you ride at you could get more help.
 
I have a Hytech roller secondary and a speed ring for the primary off my sx700 for sale. Awsome kit does everthing that they say it does.
 
Yamahasrx700 said:
I will take $200 for both. E mail me with a phone number and I will give you the specifics. This is a fantastic clutch kit. Ron@RandRFabricating.com
Click to expand...
where about do you live and do you have paypal. and do you have a site where i can read about this secondary??? and what brand is it???? do you have any pics. and what is every piece that i would be buying.
 
Last edited:
I live in Channahon Il. You can look at it at hitechperformance.com. Look at the "ER kit and the speed ring. I will even throw in the upper gear to get the most out of the kit.
 
and if you do have paypal i will buy them but just let me know what parts you have like on that site there are i think 4 parts will i be getting the complete kit.
 
I had those pipes on a '97 SX 700, really ripped once set up. They aren't a torque pipe, but they definately aren't slow by any means. Rev them at 8900-9000 out of the hole and 9100-9200 on top end. What i ran for clutching wouldn't help you much because i ran a p-85 primary but we can help you out if you let us know what you are looking for.
 
You must log in or register to reply here.


Back
Top