how long should I let my 600 srx warm up in the morning?
Last edited:


2ooosrx
VIP Member
- Joined
- Oct 2, 2004
- Messages
- 2,414
- Age
- 35
- Location
- Gurnee, Illinois
- Website
- www.cbperformanceparts.com
The general rule of thumb is to let your sled warm up for approx 4-5 minutes. What most people do is go outside and start their sled and let it warm up, then go inside and change into gear and come back out and ride!
bucky
New member
I usually let it warm up nice so i can touch each cylinder and if they are all warm just go a little easy for the first mile or so then progressively open it up and you'll be fine.
*99sRx700*
New member
5 minutes is fine, shoudl have heat in the pipes and cylinders/pistons by then. Just do as 2ooosrx said, start it, then go in and change into gear, then go out and ride, that usually takes atleast 5 minutes.
start up
thanks for your imput!
thanks for your imput!
aSRX600guy
New member
waite till the floor boards are warm
98srx6
New member
aSRX600guy said:waite till the floor boards are warm
I agree...I dont touch the throttle at all until I can feel heat in the exchangers.
auji700triple
New member
correct, until the Thermostat starts to open!