Woodydog
New member
I started up my 02 Viper for the first time this year on Friday. Put new plugs in, poured a little gas in the cylinders and it fired up on the 1rst pull. I had about a 1/2 inch of gas in the tank with seafoam in it as well. I put about 3 gallons of new gas in. I let it idle for about 5 minutes, rode it around the yard a little bit, let it idle for another 10 minutes drove to the gas station, filled the tank and rode it to a friends house. I got off the sled for a minute with it still idling got back on, gave it gas and it died. I couldn't get it to start, changed to new plugs again and nothing, checked the spark and I don't have anything. Any ideas of what may be wrong? I looked at all wire connections I could see in the engine compartment and under the steering pad. I can't see anything that might be wrong. The sled has 4700 trouble free miles on it. I have fogged it and seafoamed it every year. Any place to look first? My limited knowledge is tapped, but I do have a snowmobile mechanic/friend coming to look at it tonight, any help would be greatly appreciated.
Thank you, Woodydog
Thank you, Woodydog