'94 vmax 600 with GYT Pipes

[fbird92]

I have a 1994 vmax 600. I bought GYT pipes for it about 2 years ago and haven't installed them. When i bought them they were sent to my house when i was at school, and i didn't think to look to see if the instruction were in there until it was to late. I have asked alot of people what I have to re-jet it to and also about clutching, and have got no where. So maybe just Maybe someone here will be able to tell me. I would very much appreciate it.

 

[MrSled]

here is a start point for ya... 156.3 jets, needle position stock, 8ab weight with 2.4 g in the inner hole, 2.7g in the outer p-p-p primary spring with 2 engagment shims, 50/41 helix with silver sec at 80 deg. This is what we ran in a 96 xt with gyt twin pipes.

 

[kysledneck]

Try this! Also there in the end READ 92 octane from now on!

 

[fbird92]

AWESOME!!!! Thanks guys for your help. Now i can put the pipes to good use and get the installed. HAppy riding to the rest of you out there.

 

[2001_blue_sxr]

get us a sound clip good luck

 

[fbird92]

I'll let you guys know how it goes!!! wish me luck!

 

[fbird92]

Anyone here have hardware or know of wheree to get the hardware for these pipes. the 2 manifolds, bolts, springs etc....

I would very much appreciate it.