rollers

[gtiranger302]

can someone tell me how to tell if you have 14.5 rollers.My stock ones measured 14.5 and they say there supposed to have been 15.0(2001 SXR700)I just bought some and they measured them and they were 13.0,measured all of them with a micrometer.Do you measure the outside diameter or what?Thanks in advance

 

[gtiranger302]

turk,help please!!!!!

 

[Turk]

Check the markings on the sides of the rollers to be 100% sure.
14.5 =groove 1 side-machined on the other
15mm=grooved 1 side-no markings on the other side
15.6=no marks either side
16mm=grooved on both sides.
You gotta look close at the edges to tell em apart.

 

[Turk]

That will be 1 beer Si Vous Plait!

 

[gtiranger302]

thanks again,got kinda worried i just bought them and wanted to make sure.

 

[Bischof]

That will be 1 beer Si Vous Plait!

So your chargin beer for advise are ya.
Crap, do I need to supply a tapper or do you have your own?