Hey guys I need help. I just bought a Bender 4x4 single pipe and noticed that the end that connects to the can is different than the stock pipe. On the stock pipe there is a doughnut/ round shaped end on it and on the 4x4 single it ends stright with a flange on it. The pipe goes about 1/2 inch into the can beyond the flange. I'm not sure it that is correct or if I am missing a doughnut piece that sits behind the flange to seal up the pipe/can? Any help is greatly appreciated.
Yamanewf
New member
You are missing the donut gasket. I don't know how much they are from yamaha but you could probably match one up at an auto parts store for less than 10.00 easy. Will the one off of your stock pipe fit?
Well I'm not sure. I believe it might, but unfortunetly my sled is about 100 miles away from me. I wanted to be prepared for when I go riding. So there is a doughnut that goes in between the pipe and can. I didn't know that. I really appreciate the fast response.
Mark
Mark
Millinocket Rocket
New member
the round end on your stock pipe IS the donut gasket. pull it off and it should fit right on the bender.
Thanks, I will do that. Again I appreciate all the great feedback.
Millinocket Rocket
New member
glad to help-- let us know if you notice any gains w/ that pipe 