95 600 vmax dx track drive housing to track drive?

[hereismylife]

hello,
95 600 vmax dx
I am tring to take off my reverse and drive housing out of my sled. I got the 4 main bolts off from the frame and got it loose. It moves about 1/2 inch and stops.
here's the questions I have?
Is there a bolt that goes from the drive housing to the track drive(cog drive)?
what would you replace while having this off?(I am replacing left and right gear drive bearings)
If i have to split the drive case what lind of oil do i use?

thanks for your time and any info you can help me with
joe

 

[mikematthys]

i dont know abought a bolt or nut some times it just needs a little pull as for the oil use 80/90 or snowmobile chain case oil i use the 80/90 my self

 

[yammy]

you sure do have to take cover off chain casing and remove gears, only way to replace bearings!

 

[btalon]

hello,
95 600 vmax dx
I am tring to take off my reverse and drive housing out of my sled. I got the 4 main bolts off from the frame and got it loose. It moves about 1/2 inch and stops.
here's the questions I have?
Is there a bolt that goes from the drive housing to the track drive(cog drive)?
what would you replace while having this off?(I am replacing left and right gear drive bearings)
If i have to split the drive case what lind of oil do i use?

thanks for your time and any info you can help me with
joe

I'm looking for the alternate reverse gear shaft if you are taking yours off and want to sell it - let me know - thanks