TimeBomb
New member
pistons, rings, cylinders recoated(not b/c of water) tore the motor down to get the rest of the water out b/c it was pushing water out the base gasket. noticed the pistons and skirts were bad when it was torn down so no better time to fix it.
TimeBomb
New member
well here she is, minus the seat. today is 2 weeks from when it was pulled out. we got a little bit of snow yesterday so i wanted to take it for a ride. put about 10 miles on it. so far everything seems to work alrite, except the reverse alarm for my reverse but that is no big deal. had to put my stock pipe back on b/c i found a small crack in my bender pipe. that should be welded and powercoated soon hopefully 

Attachments
daman
New member
Cool...you cant even tell
how's she run out?? Strong.
Glad to hear it man.

Glad to hear it man.

03viperguy
Moderator
consider it as a full wash. lol! glad to hear things are still going good for you!
TimeBomb
New member
she runs just like it did b4 she went swimmin. just not used to the sound of the stock pipe. alot quieter than with the bender pipe
BigMan76
Member
Sponsons?
Maybe you can take the riva sponsons off the waverunner and put 'em on the sled?
Couldn't resist. Sounds like you have it all together and good to go. Throw the seat on and hit the trail. Best of luck.
Maybe you can take the riva sponsons off the waverunner and put 'em on the sled?

Couldn't resist. Sounds like you have it all together and good to go. Throw the seat on and hit the trail. Best of luck.
TimeBomb
New member
good one
i still have the stock sponsons off my gp. they would be alrite, just put them on the tunnel. 


TimeBomb
New member
daman
New member
what did they soak ya for the powder coat
03viperguy
Moderator
looks good, things are coming together it looks!
the old seat off sled
just curious as if youd want to get rid of the old seat?, I am looking at sectioning about 5 inches thickness out of one and would like to cut up a old one, let me know, thanx
just curious as if youd want to get rid of the old seat?, I am looking at sectioning about 5 inches thickness out of one and would like to cut up a old one, let me know, thanx
Old seat
Yeah on that seat (if Don Doesn't need it of course, I need the last few inches of the wiring harness to put a light on a new custom seat for a Viper. Please let me know guys.
Thanks,
Madmatt
Yeah on that seat (if Don Doesn't need it of course, I need the last few inches of the wiring harness to put a light on a new custom seat for a Viper. Please let me know guys.
Thanks,
Madmatt
Godster
New member
Hey Timebomb, I am new to this site, and new to sledding, I am extremely glad you are OK. And your attitude towards everyone here is great too! Glad you decided to do your own thing (about the restarting) Hey if your engine blows and folks say the I told you so, all you can say is YES YOU DID. With a smile cause you are still here with your sledding buddies........
Dario
Dario
TimeBomb
New member
thanks godster.
mrviper700,madmatt- sorry but i have "plans" for my old seat, that is why i got another one.
mrviper700,madmatt- sorry but i have "plans" for my old seat, that is why i got another one.
VmaxSx600
New member
screw the seat man put a yz seat on there and fabricate a bench to hold the seat in place
03viperguy
Moderator
because those seats are ridiculous unless you are blaze or hardcore mtn rider lol! trail riding you need a seatVmaxSx600 said:screw the seat man put a yz seat on there and fabricate a bench to hold the seat in place
TimeBomb
New member
daman said:what did they soak ya for the powder coat
sorry, didn't notice your question earlier. it cost me 50$ to get it powder coated
800
New member
Mrviper I have a sectionable seat, Timebomb, did you ever read my first post the day after you sunk it??????? I told you I'd give you a foam for your seat......................
03viperguy
Moderator
I wondered about that too. seemed like a good deal 

TimeBomb
New member
800 said:Mrviper I have a sectionable seat, Timebomb, did you ever read my first post the day after you sunk it??????? I told you I'd give you a foam for your seat......................
sorry i never noticed, oh well too late now. alot of things on my mind the next day. i prbly read it and didn't even think about it.