ponch1
New member
- Joined
- Jan 11, 2006
- Messages
- 7
Hello:
I am putting a 80cc (1989) Sno Scootr carb together with no tech info available. Can some one clue me in on the "how many turns" for the main jet and also for the longer "jet"? that goes up the center. Anything that can be passed along would be a BIG help, more the better Thank you!
I am putting a 80cc (1989) Sno Scootr carb together with no tech info available. Can some one clue me in on the "how many turns" for the main jet and also for the longer "jet"? that goes up the center. Anything that can be passed along would be a BIG help, more the better Thank you!
ponch1
New member
- Joined
- Jan 11, 2006
- Messages
- 7
sno scoot
I have the sno scoot (80 cc unit) running. BUT it will only run the choke on. Shutting off the choke, it will run for not quite 10 seconds then dies off like it ran out of gas.
I have the outside jet set correctly I believe and the float as well... I think so anyway. The main nozzle setting I am unsure of.
The ports on the carb throat have been cleaned and are clear.
Any input would be appreciated!
I have the sno scoot (80 cc unit) running. BUT it will only run the choke on. Shutting off the choke, it will run for not quite 10 seconds then dies off like it ran out of gas.
I have the outside jet set correctly I believe and the float as well... I think so anyway. The main nozzle setting I am unsure of.
The ports on the carb throat have been cleaned and are clear.
Any input would be appreciated!