But it runs just fine once it gets going. Its only when sitting at idle then taking off it bogs. But once you get it moving it doesn't do it anywhere in accelaration.
There has been plenty of discussion about the location of the TORs wires, what your descibing doesn't sound like them...but in the middle of the carb rack under the throttle cable is a sensor with two wires. Pick it there and follow it to the end. Unplug the two wires from the harness and plug the machine side wires into each other.
Any idea other then carbs ? i cleaned them last year and i DIDN"T use sta-bil but rather Sea foam over the summer. Not only that, but it ran okay for the first 50 miles and it's getting worse every day.