hereismylife
Active member
hello,
I was wondering what would be the best way to fix the plastic shrouds (body panels) pieces?
I have some cuts and holes and want to repair them. Also i have to put the bottom clips on the drivers side shroud at the bottom. Somebody repaired them but it is not the best fix. Any ideas would be great.
thanks for your time
joe
I was wondering what would be the best way to fix the plastic shrouds (body panels) pieces?
I have some cuts and holes and want to repair them. Also i have to put the bottom clips on the drivers side shroud at the bottom. Somebody repaired them but it is not the best fix. Any ideas would be great.
thanks for your time
joe
madmax
Guest
its probably alot less hassle to just buy new ones, i bought them for my sled $20 each, thats what i would do, unless if some one else knows a trick but what im thinking wouldnt look pretty
hereismylife
Active member
madmax said:
where did you get them for so cheap?
I have a 95 vmax 600 dx (2 up) sled.
thanks for the imput
joe
mulderdad
New member
Go in the classified section and post under Wanted to buy category.
Post what you need.
You would be suprised at what deals you can find on ty.
cheers,
mul
Post what you need.
You would be suprised at what deals you can find on ty.
cheers,
mul
