I`m having trouble with the fuel gauge on my viper 2002.. It was not working at all, and now i wonder if i have managed to fix it..
But the question:
What resistance should i be measuring with my instrument, at full/empty tank?
I`m looking at 0.01 ohm at full, and 0.092 at empty tank, thinking it`s way too little.. (the thin wire inside the gauge measured 0.092ohm as well)
At least this killed my blinking warning lamp, and showing a full tank now like it should.. but i couldnt push the "measuring float" far enough down the tank/fuel, to show less fuel on the display
But the question:
What resistance should i be measuring with my instrument, at full/empty tank?
I`m looking at 0.01 ohm at full, and 0.092 at empty tank, thinking it`s way too little.. (the thin wire inside the gauge measured 0.092ohm as well)
At least this killed my blinking warning lamp, and showing a full tank now like it should.. but i couldnt push the "measuring float" far enough down the tank/fuel, to show less fuel on the display
4-10 Ohms at 20*C Full
90-100 Ohms at 20*C Empty
Your readings look good if your meter is on the Kohms scale, better check.
90-100 Ohms at 20*C Empty
Your readings look good if your meter is on the Kohms scale, better check.