8AB weights can i use these?

[SNOWRULES]

can i use 8AB's on my 2000 sx-r700 have them laying around from my srx just wondering if they'll work or if anyone has run them in a sxr700 thanks

 

[REDMATER]

yes they can be used not sure of the rivet combo you would need though.

 

[SNOWRULES]

ok just wanted to know if anybody used these with any success like if they worked well and shifted nicely and all that

 

[MrSled]

I use them in my 01 sx-r...I like them the best for the 700 sx motor.

 

[SNOWRULES]

any suggestion for rivet placement for them in an sxr 700 sled has 22/40 gearing, 14.5 mm rollers,stock springs in both clutches, 1 layer removed from head gasket, reed spacers, bored silencer,1 size down on mains, 1 size down on pilots, needle clip set at 2.5, transfer rods by maxx performance, 144 studs looking for good all around trail performance i weigh 185 pounds if this info helps

 

[MrSled]

start with 2.4 g in both holes

 

[SNOWRULES]

k thanks alot i'll try that this weekend