my review on Sno-Tek bushings

[03viperguy]

I got th efront radius rod set and the set for the spindle bolts that hook the skis up. both were a pretty straightforward install and the difference was noticeable the front end play is next to NOTHING, and all the parts seemed like great quality! recomend them to anyone that doesnt like a sloppy front end

 

[WATCHMAKER]

I have no doubt that the kit removed slop, however did it make a noticeable difference in handling?

 

[BETHEVIPER]

try the link below for the same thing with no money spent.


line up yours

 

[Old Thumper]

I put all new bushings in my sled this year - skid and front end. The front end bushings I got from Yamaha were sloppier than the worn bushings I took out !! I was not impressed...

 

[03viperguy]

I didnt feel confident in tightening up bushings that were over 5k miles old. these are tighter and more slippery. the handling difference was there for me, but I would think it would depend on how bad the old ones were. front end actaully feels smoother over small bumps. can only guess things were binding up. and it FEELS like there was more ski pressure as it was handling a TAD bit tighter. again, I figure with the skis flopping things cant possibly work as designed BTV, thanks for the tip though. I just wanted something a little higher quality than the plastic bushings that were in there